E30 3-serie

4x screws and 4x locking rings made from V2A for 2 door handles,

Suitable for E12, E21, E23, E24, E28, E30

Mounting kit for the E30 tank + tank pipe, 55 and 63 liters version.

10 Flange nuts for the struts for (6) and rear (4).

2x locking screws for the differential, suitable for all versions,

Yellow galvanized

With 2 new aluminum sealing rings

Only suitable for the E30 face lift model (NFL)

4x Allen bolts (damper on bumpers)
8x hexagonal bolts (damper on bodywork)Why Allen screws?
Torx and Allen screws were sometimes used on the E30.
With corrosion, the Allen bolts are…

Differential Cover for E30

Consists of screws, nuts and rings for:

∙ 8x Differential lcover
∙ 1x Differential mount
∙ 2x Pulse generator
∙ 1x O-ring pulse generator

Suitable for the 168 and 188 differential on the BMW E30

Mounting kit for the chassis of the BMW 3 series, E30,
Suitable for the models with M10, M20, M40, M42, S14 motor and the 168 + 188 differentialThe set consists of screws, nuts and rings for the following components:

∙…

Mounting kit for the M50 engine mounts from the E36 and E34 models

Mounting kit for the oil filter housing of the BMW M50 / M52 from 09/92

Mounting kit for the oil filter housing of the BMW M50 up to and including 09/92

Mounting kit for the engine mounts of the BMW M10 engine, from E21, E28, E30 models.

The set consists of 22 parts, all galvanized yellow

Mounting kit for the engine mounts of the BMW M10 engine, from the first models of the E21.

The set consists of 22 parts, all galvanized yellow

Mounting kit for the engins mounts of the BMW M10 engine, from the 02 series, year of construction 1966-1977.

The set consists of 29 parts.

Mounting kit for the aluminum oilpan for the M10 engines.

Suitable for the engine from the E21, E28 and E30

The set consists of 61 parts, all galvanized yellow

Mounting kit for the steel oilpan for the M10 engine.

Mounted in the models of the new class, 02, E12 and the first E21.

The set consists of 45 parts, all galvanized yellow

Montage kit M42 / M44 engine, from E30 and E36

The set contains all mounting parts for the following components:

∙ Oilpan
∙ Distribution cover top and bottom
∙ Dynamo (choose in the menu whether you need the E30 or E36…

Mounting Kit M20 Engine

The set contains the following screws, nuts and rings:

∙ Oilpan
∙ Cylinder head
∙ Distribution cover
∙ Dynamo
∙ Intake manifold
∙ Engine mounts
∙ Pulleys
∙ Exhaust manifold
∙ Starter
∙…

Mountingkit M10 Engine

Yellow galvanized, dimensions and strength classes as original.

The set contains the following screws, nuts and rings:

∙ Distribution cover
∙ Dynamo
∙ Intakemanifold
∙ Valve cover
∙ Olit filter…

Air grille holder large

∙ Original look
∙ 3x 52mm/2" hole for three meters (not included)
∙ 3D printed
∙ Immediately ready for mounting

Air grille holder small

∙ Original look
∙ 52mm/2" hole for one meter (not included)
∙ 3D printed
∙ Immediately ready for mounting

GARAGISTIC E30, E36, E46, Z3, E82, E90, AND E92 POWER STEERING DELETE BLOCK
As with many things in this world, there is a right way to do something; to properly delete power steering, you'll need to proper parts and tools. When…

E30 SHOCK TOWER REINFORCEMENT GUSSETS (LEFT AND RIGHT)

Playing a similar role to strut bars, these weld in shock tower reinforcements came factory on E30 convertibles to compensate for the fact that the roof (a structural part of…

Service Interval / Oil Reset Tool

Instructions:

∙ Plug the Device into the 20 pin diagnostic socket of the car located in the engine compartment
∙ Turn ignition key to enable the board electronic but do not turn on the…

E30 Pop-out Windows Covers

Many miss these covers and unfortunately they are no longer available at BMW.
This is a perfect alternative, even the structure is simulated with this 3D printed version.They stay in place perfectly and…

Unlike others, these adapters are 3D printed with high quality resin print so they look like cast plastic (just like the OEM ones).

∙ They are ready to install.
∙ Nice way to install a 52mm/2″ gauge in your BMW E30.
∙…

Universal Gauges

∙ Very small size
∙ Simple and quick connection via included couplings
∙ High quality LED display
∙ Clear and legible display
∙ Choice of digital sensor in brass housing with M12x1,5 or M14x1,5…

2x BMW SWRA wiper blade holder

∙ Material: weather resistant PTEG
∙ Color: black mat
∙ Scope of delivery: 2x holder
∙ The wiper holders are attached to the wiper arm like the original and click into place…

BMW Sliding roof crank knob

∙ Material: UV resistant PTEG
∙ Color: black mat
∙ Fits firmly and without play
∙ Runs easily
∙ Assembly: as original
∙ Assembly instructions: Press the knob firmly onto the crankpin,…