Bolts & Nuts

4x screws and 4x locking rings made from V2A for 2 door handles,

Suitable for E12, E21, E23, E24, E28, E30

4 Allen bolts with 4 corrugated rings, for mounting the 4 ABS sensors

Mounting kit for the seat rails / seat consoles of the driver and front passenger seat (1x per vehicle required)

12x screws for the small drive shafts.

M10X43, Strength class 10.9, Yellow galvanized. Allen bolts (for better power transmission).

Check on the vehicle as there were 2 manufacturers of the drive shafts.

12x screws for the large drive shafts,

M10x50, Strength class 10.9. Allen bolts (for better power transmission).

Check on the vehicle, since there were 2 manufacturers of the drive shafts.

Suitable for the M3, 325ix or…

4x screws made from V2A for the rear license plate lighting of the models E12, E21, E23, E24, E28, E30, M1, Z1

Schock Absorbers Rear 10.9

This item has been moved to: 42. Shock absorber rear 10.9

4x crosshead screws made from V2A for the inner mounting frame of the fog lights,

6x hex screws, galvanized, for mounting the holder frame to the body

Mounting kit for the E30 front spoiler pre-facelift, consisting of 5 plate screws made from V2A

4x screw for the grille headlights

Flange screws for the flanges of the 168, 188 or 210 differential.

∙ Yellow galvanized
∙ Strength class 8.8
∙ Please choose your differential:168 = 8 bolts
∙ 188 = 12 bolts
∙ 210 = 16 bolts

Mounting kit for the E30 bonnet.

Mounting kit for the two fenders of the BMW E30.

18x Self-tapping clamp

18x plate nuts

Screws and nuts for the two heat shields on the E30.

∙ 4x special rear nut (above the exhaust silencer)
∙ 8x screws with rings (above the cardan shaft)
∙ 4x Self-tapping clamp (new!)
∙ 4x plate nuts (new!)

Mounting plate for the pulse generator in the differential

Yellow plated!

Nuts and bolts for the Differantial

Nuts and bolts for the Suspension arm rear

Nuts and bolts for the Suspension arm rear

Nuts and bolts for the Hand brake

Nuts and bolts for the Shock absorber rear, 10.9 Strength class

Nuts and bolts for the Stabilizer rear

Nuts and bolts for the Stabilizer front

Nuts and bolts for the Brake dust plates

Nuts and bolts for the Steering house

Nuts and bolts for the Subframe rear

Nuts and bolts for the Subframe front

E36/E46 steering rack spacers for E30

Many people install an E36 or E46 steering rack on their E30 because they have a shorter steering angle. However, the steering rack does not fit well and spacers are needed.

With these…

Mounting kit for the two front and rear speaker covers of the E28 / E30.

Consists of 16 cross-head screws made of V2A

E28 M30 Wishbone Rear Axle Bolts and Nuts

Suitable for the M30 engines and the large rear axle

Mounting kit for the differential cover of the BMW E36

Suitable for all models with the 168 and 188 differentials (all models except M3)