E30 Exterior

BMW Bonnet Emblem

This new and original emblem fits the following models:

∙ E26
∙ E81
∙ E82
∙ E87
∙ E88
∙ E21
∙ E30
∙ E36
∙ E46
∙ E90
∙ E91
∙ E92
∙ E93
∙ F82
∙ E12
∙ E28
∙ E34
∙ E39
∙…

BMW Trunk Emblem

This new and original emblem fits the following models:

∙ E28
∙ E30
∙ Z3

ETK number: 51141872969

Pre-facelift rear bumper end pieces

The bumper end pieces of the chrome rear bumper of the pre-facelift E30's are often worn, broken or gone!
This is a very good alternative.Available for both the convertible and the sedan. Make…

BMW E30 Headlight Wipers Set

This OEM quality kit can be installed directly with your original motor, or can simply be installed with the fitting bolt provided in the box with your purchase.

Contents:

∙ 2x Headlight wiper…

High-quality OEM look BMW E21/E23/E28/E30 headlight wiper blades including the metal ball joint

Replace your old headlight wiper blades that no longer make proper contact with the headlight surface, squeak, chatter, skip, smear,…

The M-Tech I front spoiler splitter for the BMW E30.
Fits all M-Technic 1 front spoilers. Both for original and replica spoilers.Included in the set are the mounting clips to attach the lip. For this you need to drill some holes…

The M-Tech II front spoiler splitter for the BMW E30.
Fits all M-Technic 2 front spoilers. Both for original and replica spoilers.Included in the set are the mounting clips to attach the lip plug & play without having to drill or…

AC Schnitzer emblem - grille

∙ Original AC Schnitzer product
∙ Mounting: On the grille, with the supplied mounting kit
∙ Size: 160 x 32mm
∙ Color: silver

AC Schnitzer emblem - tailgate

∙ Original AC Schnitzer product
∙ Mounting: On the tailgate
∙ Size: 160 x 32mm
∙ Color: silver
∙ Self-adhesive: Yes

Alpina emblem - tailgate

∙ Original Alpina product
∙ Mounting: On the tailgate
∙ Size: 160 x 32mm
∙ Color: silver
∙ Self-adhesive: Yes

BMW E30 Convertible Windscreen

∙ Turbulence free convertible driving!
∙ TÜV tested
∙ Assembly without drilling!
∙ Dutch product
∙ Easy assembly

How does a wind deflector work?
The wind delfector consistes of a steal…

E30 Headlight adjustment tool

Adjusting the E30 headlights is often a tedious job. Not only are the adjusting rods often very tight, you also get little grip on the small holders, making it unnecessarily difficult to get the…

17" BBS RC090 center caps

If you don't like the original RC090 center caps, then this is the solution for you!
Create a RS look with this center cap set.The locking system is similar to the BBS Style 5 wheels (twist hexagon to…

"I'd rather be driving my E30" sticker

A statement that is always true when you're not driving your E30 "I'd rather be driving my E30"!

Now you can make that clear to everyone with this sticker.

Details:

∙ External adhesive…

E30 Headlight wiper blades

Are the headlight cleaning wiper blades worn out or missing? This is a great alternative to make your set working and/or complete again.

Contents: set of 4 wiper blades
Material: 3D printed with rubber…

16" BBS Center Cap - Style 5​

The 16" BBS center caps are in the opinion of many, simply not nice. With this set of center caps you create the look as you know it from the E30 14" and 15" BBS rims.

∙ 4 wheel caps for the BMW…

E30 Fog light frames - early model

This frame is often broken or missing on many E30s. This is a nice alternative to complete the fog lights again :)

∙ Material: PETG printed
∙ Colour: black
∙ Fits: E30 1982-1987 - early…

E30 16" Alpina Center Caps

The 16" Alpina center caps are becoming scarce and are no longer available new.
This set is a very nice alternative!∙ Set of 4 center caps for the OEM 16" Alpina wheels
∙ Diameter: 139-140mm
∙…

Mounting kit for the chassis of the 325iX BMW 3 series, E30.
Suitable for the 325iX model. The set consists of screws, nuts and rings for the following components:

∙ Differential 10.9
∙ Suspension arm rear
∙ Suspension arm…

E30 M-Tech II brake air ducts

Do you want to mount an M-Tech II body kit on your E30? Then you also need these extended brake air ducts that connect the M-Tech II front spoiler to the plate at the brakes, thus ensuring the brakes…

E30 Cruise Control Clutch Switch Bracket

∙ Suitable for the facelift E30 with M20, M21 and the S14 engine320i
∙ 325i
∙ 325th
∙ 324d
∙ 324td
∙ 325iX
∙ M3

∙ Yellow zinc plated
∙ This replaces part 35111157815

Anti Roll Bar Holder - Rear

∙ A set of 2 Stabilizer bar holders - rear
∙ Suitable forAny E30
∙ E36 compact
∙ E28
∙ Z3

∙ Yellow zinc plated
∙ Includes all necessary bolts, nuts and washers
∙ This replace part 33321127717

Stabilizer Bar Holder - Front

∙ A set of 2 Stabilizer bar holders - front
∙ Suitable for:Any E30
∙ Any E36
∙ Z1 Roadster
∙ Z3

∙ Yellow zinc plated
∙ Includes all necessary bolts, nuts and washers
∙ These replace part 31351127263

E30 pre-face front bumper brackets​

∙ A set of 2 brackets for the E30 pre-face front bumper
∙ Yellow zinc plated
∙ This replaced part 51111888122 (price at BMW = €115,82)

E30 M3 Turn signal covers white

∙ Fits any E30 M3
∙ set of 2
∙ Sporty look

Set of 2 black/dark turnsignal covers.

∙ Suitable for all E30, except for the M3!
∙ Sporty appearance

Convertible cover - 1 piece

The cover caps of the convertible top at the "B-pillar" often break, are lost or the springs break off, so that they no longer remain closed.

With this 3D printed cap you are again provided with a…

M-Technic Striping

∙ Kit of decals for the whole car.
∙ The vinyl is resistant to water, UV rays and mechanical damages.
∙ The stickers have intensive colours, they look like originals.
∙ Self adhesive, with a durable…

15" BBS Center Cap - 171mm - 1 piece

The 15" BBS center caps are becoming rare and are terribly expensive new and the price continues to rise.
This is a very nice alternative!∙ 1 center cap for the BMW E30 15" BBS rimsAlso…

15" BBS Center Caps - 171mm

The 15" BBS center caps are becoming rare and are terribly expensive new and the price continues to rise.
This set is a very nice alternative!∙ Set of 4 center caps for the BMW E30 15" BBS rimsAlso…