Bolts & Nuts

Complete E30 Nuts & Bolts kit​

By popular request it is now possible to buy all bolts, nuts, washers, etc that I have to offer for your E30 in 1 product.

Select from the list which engine kit you want to include and which…

Mountingkit M10 Engine

Yellow galvanized, dimensions and strength classes as original.

The set contains the following screws, nuts and rings:

∙ Distribution cover
∙ Dynamo
∙ Intakemanifold
∙ Valve cover
∙ Olit filter…

Mounting Kit M20 Engine

The set contains the following screws, nuts and rings:

∙ Oilpan
∙ Cylinder head
∙ Distribution cover
∙ Dynamo
∙ Intake manifold
∙ Engine mounts
∙ Pulleys
∙ Exhaust manifold
∙ Starter
∙…

Montage kit M42 / M44 engine, from E30 and E36

The set contains all mounting parts for the following components:

∙ Oilpan
∙ Distribution cover top and bottom
∙ Dynamo (choose in the menu whether you need the E30 or E36…

Mounting kit for the M50 / M52 engines of the E34 and E36.

The set contains the following screws, nuts and washers:

∙ Water pump + thermostat
∙ Chain guard
∙ Retaining plate from the shaft seal ring (WDR) to the…

M30 Engine Kit

The M30 is made in 3 different variants, choose from the list which variant you need.

Contents M30 E3/E9:

∙ M30 oil seal
∙ M30 water pump
∙ M30 thermostat
∙ M30 exhaust manifold
∙ M30 oil pan E3/E9
∙…

Mounting kit for BMW M60/M62 engine

The set contains the following screws, nuts and washers for:

∙ Chain guard above
∙ Chain guard below (only for the air-cooled alternators)
∙ Water cap in the V+ knock sensors
∙ Water…

Mounting kit for the chassis of the 325iX BMW 3 series, E30.
Suitable for the 325iX model. The set consists of screws, nuts and rings for the following components:

∙ Differential 10.9
∙ Suspension arm rear
∙ Suspension arm…

Mounting kit for the chassis of the BMW 3-series, E21.
Suitable for all E21 modelsThe set consists of screws, nuts and washers for the following parts:

∙ Front axle subframe
∙ Anchor plates
∙ Mounting differential +…

Bolts and nuts for the E28 chassis

Included in the kit:

∙ Handbrake
∙ ABS sensors
∙ Subframe rear
∙ Differential
∙ Brake anchor plates
∙ Rear stabilizer
∙ Stabilizer front
∙ Shock absorber rear
∙ Shock absorber…

Mounting kit for the front and rear axle of the BMW 02 E10.

Note: Long delivery time at the moment!

Included are all screws, nuts, washers for:

∙ Subframe front axle
∙ Anchor plates front axle
∙ Anchor plates rear…

BMW E32/E34 Chassis set, fits all models

The set contains screws, nuts and washers for:

∙ ABS Sensors
∙ Brake anchor plates
∙ Subframe front axle (not for E34 Touring)
∙ Strut front axle
∙ Strut rear axle
∙ Control…

Mounting kit for the steel oilpan for the M10 engine.

Mounted in the models of the new class, 02, E12 and the first E21.

The set consists of 45 parts, all galvanized yellow

Mounting kit for the aluminum oilpan for the M10 engines.

Suitable for the engine from the E21, E28 and E30

The set consists of 61 parts, all galvanized yellow

Mounting kit for the engins mounts of the BMW M10 engine, from the 02 series, year of construction 1966-1977.

The set consists of 29 parts.

Mounting kit for the engine mounts of the BMW M10 engine, from the first models of the E21.

The set consists of 22 parts, all galvanized yellow

Mounting kit for the engine mounts of the BMW M10 engine, from E21, E28, E30 models.

The set consists of 22 parts, all galvanized yellow

Differential Cover for E30

Consists of screws, nuts and rings for:

∙ 8x Differential lcover
∙ 1x Differential mount
∙ 2x Pulse generator
∙ 1x O-ring pulse generator

Suitable for the 168 and 188 differential on the BMW E30

Only suitable for the E30 face lift model (NFL)

4x Allen bolts (damper on bumpers)
8x hexagonal bolts (damper on bodywork)Why Allen screws?
Torx and Allen screws were sometimes used on the E30.
With corrosion, the Allen bolts are…

2x locking screws for the differential, suitable for all versions,

Yellow galvanized

With 2 new aluminum sealing rings

10 Flange nuts for the struts for (6) and rear (4).

Mounting kit for the E30 tank + tank pipe, 55 and 63 liters version.

4x screws and 4x locking rings made from V2A for 2 door handles,

Suitable for E12, E21, E23, E24, E28, E30

4 Allen bolts with 4 corrugated rings, for mounting the 4 ABS sensors

Mounting kit for the seat rails / seat consoles of the driver and front passenger seat (1x per vehicle required)

12x screws for the small drive shafts.

M10X43, Strength class 10.9, Yellow galvanized. Allen bolts (for better power transmission).

Check on the vehicle as there were 2 manufacturers of the drive shafts.

12x screws for the large drive shafts,

M10x50, Strength class 10.9. Allen bolts (for better power transmission).

Check on the vehicle, since there were 2 manufacturers of the drive shafts.

Suitable for the M3, 325ix or…

4x screws made from V2A for the rear license plate lighting of the models E12, E21, E23, E24, E28, E30, M1, Z1

Schock Absorbers Rear 10.9

This item has been moved to: 42. Shock absorber rear 10.9

4x crosshead screws made from V2A for the inner mounting frame of the fog lights,

6x hex screws, galvanized, for mounting the holder frame to the body

Mounting kit for the E30 front spoiler pre-facelift, consisting of 5 plate screws made from V2A

4x screw for the grille headlights

Flange screws for the flanges of the 168, 188 or 210 differential.

∙ Yellow galvanized
∙ Strength class 8.8
∙ Please choose your differential:168 = 8 bolts
∙ 188 = 12 bolts
∙ 210 = 16 bolts

Mounting kit for the E30 bonnet.

Mounting kit for the two fenders of the BMW E30.

18x Self-tapping clamp

18x plate nuts

Screws and nuts for the two heat shields on the E30.

∙ 4x special rear nut (above the exhaust silencer)
∙ 8x screws with rings (above the cardan shaft)
∙ 4x Self-tapping clamp (new!)
∙ 4x plate nuts (new!)

Mounting plate for the pulse generator in the differential

Yellow plated!

Nuts and bolts for the Differantial

Nuts and bolts for the Suspension arm rear

Nuts and bolts for the Suspension arm rear

Nuts and bolts for the Hand brake

Nuts and bolts for the Shock absorber rear, 10.9 Strength class

Nuts and bolts for the Stabilizer rear

Nuts and bolts for the Stabilizer front

Nuts and bolts for the Brake dust plates

Nuts and bolts for the Steering house

Nuts and bolts for the Subframe rear

Nuts and bolts for the Subframe front

E36/E46 steering rack spacers for E30

Many people install an E36 or E46 steering rack on their E30 because they have a shorter steering angle. However, the steering rack does not fit well and spacers are needed.

With these…

Mounting kit for the two front and rear speaker covers of the E28 / E30.

Consists of 16 cross-head screws made of V2A

Anti Roll Bar Holder - Rear

∙ A set of 2 Stabilizer bar holders - rear
∙ Suitable forAny E30
∙ E36 compact
∙ E28
∙ Z3

∙ Yellow zinc plated
∙ Includes all necessary bolts, nuts and washers
∙ This replace part 33321127717

Stabilizer Bar Holder - Front

∙ A set of 2 Stabilizer bar holders - front
∙ Suitable for:Any E30
∙ Any E36
∙ Z1 Roadster
∙ Z3

∙ Yellow zinc plated
∙ Includes all necessary bolts, nuts and washers
∙ These replace part 31351127263

E30 pre-face front bumper brackets​

∙ A set of 2 brackets for the E30 pre-face front bumper
∙ Black coating
∙ This replaced part 51111888122 (price at BMW = €115,82)

Drive shaft mounting plates

∙ A set of 6 Drive shaft mounting plates for the E30
∙ Yellow zinc plated
∙ These replace part number 2 on photo 2

E30 Cruise Control Clutch Switch Bracket

∙ Suitable for the facelift E30 with M20, M21 and the S14 engine320i
∙ 325i
∙ 325th
∙ 324d
∙ 324td
∙ 325iX
∙ M3

∙ Yellow zinc plated
∙ This replaces part 35111157815

BMW E30/E32/E34 Subframe bolt + washer OEM

∙ Original BMW parts
∙ Contents: 2x bolt 51718181460 + 2x washer 33331127496
∙ Mounting: subframe suspension, see image
∙ Fits:E30, all models
∙ E32 (the washer does not…