E30 3-serie

BMW E30 Instruments sticker sets!

With these decal sets you can make your levers and instrument panel look like new again!

There are 2 variants available:

Sticker set 1: suitable for the steering leversSticker set 2: suitable…

Mounting kit for the differential of the BMW E36

Mounting kit for the differential cover of the BMW E21

BMW E30 Adjustable Universal Joint Power Steering

The steering linkage is used for the installation of power steering, airbag delete and V8 engine conversions.
Because the steering linkage is adjustable, it fits almost all…

MiM Center Caps

∙ Set of 4
∙ Suitable for the MiM wheels
∙ Diameter 57mm
∙ Material: PETG
∙ Color: Black
∙ Can be painted

Wheel bolt sets from 68 to 90mm!

With this kit you can mount your wheels not only super easy, but also very safe!

The studs are threaded into the hub, so you can slide the wheel over it and it sits right in place. No more…

Mounting kit for the two front and rear speaker covers of the E28 / E30.

Consists of 16 cross-head screws made of V2A

Mounting kit for the front and rear axle of the BMW E36, suitable for all models, except compact.

All screws, nuts, washers for:

∙ Wishbone
∙ Stabilizer front
∙ Rear stabilizer
∙ Steering
∙ Front shock absorber
∙…

E28 M30 Wishbone Rear Axle Bolts and Nuts

Suitable for the M30 engines and the large rear axle

E28 M30 Wishbone Rear Axle Bolts and Nuts

Suitable for the M30 engines and the large rear axle

E30 SUBFRAME SPACERS 16mm

These spacers will lower the subframe with 16mm to keep the drive line straighter and giving more under-hood clearance for certain motor swaps in the E30 and other functions like for the BMW plastic…

Headlamp

You can always use some extra light while working on your car! You can be clumsy with a flashlight, but then you need an extra hand or the light doesn't shine where you want it too...

With this headlamp those problems…

E36/E46 steering rack spacers for E30

Many people install an E36 or E46 steering rack on their E30 because they have a shorter steering angle. However, the steering rack does not fit well and spacers are needed.

With these…

Mounting kit for the M50 / M52 engines of the E34 and E36.

The set contains the following screws, nuts and washers:

∙ Water pump + thermostat
∙ Chain guard
∙ Retaining plate from the shaft seal ring (WDR) to the…

Bolts and nuts for the E28 chassis

Included in the kit:

∙ Handbrake
∙ ABS sensors
∙ Subframe rear
∙ Differential
∙ Brake anchor plates
∙ Rear stabilizer
∙ Stabilizer front
∙ Shock absorber rear
∙ Shock absorber…

Bolts and nuts for the E28 chassis

Included in the kit:

∙ Handbrake
∙ ABS sensors
∙ Subframe rear
∙ Differential
∙ Brake anchor plates
∙ Rear stabilizer
∙ Stabilizer front
∙ Shock absorber rear
∙ Shock absorber…

E30 Door Handles "///M-Technic" for pre-prefacelift (with knurling at the backside)

Set of 2 OEM door handles with "///M-Technic" engraving. Have been repainted.
Includes a set of new mounting screws.

E30 Door Handles "///M-Technic"

Set of 2 OEM door handles with "///M-Technic" engraving. Have been repainted.
Includes a set of new mounting screws.

E30 Door Handles "BMW Motorsport"

Set of 2 OEM door handles with "BMW Motorsport" engraving. Have been repainted.
Includes a set of new mounting screws.

Fuel Line Hose Cover Pre-prefacelift

∙ Only compatible with the early model VVFL 1982-1985, model with 6 brackets
∙ Made from fibreglass and will not rot like the original metal versions
∙ Durable
∙ Perfect fit

Optional:…

Convertible roof cover spring set

The springs of the convertible top covers on the "B-pillar" are often broken or lost.
This causes the cover to stand up unsightly.With these new springs you are again provided with properly…

E30 Baur Targa roof guides

The E30 Baur has a removable Targa roof and you can store it in the trunk of your E30 Baur.
For this you need this set of guides.
The guides come with integrated magnets.

Convertible cover set

The cover caps of the convertible top at the "B-pillar" often break, are lost or the springs break off, so that they no longer remain closed.

With these 3D printed caps you are again provided with properly…

Nuts and bolts for the Subframe front

Nuts and bolts for the Subframe rear

Nuts and bolts for the Steering house

Nuts and bolts for the Brake dust plates

Nuts and bolts for the Stabilizer front

Nuts and bolts for the Stabilizer rear

Nuts and bolts for the Shock absorber rear, 10.9 Strength class

Nuts and bolts for the Hand brake

Nuts and bolts for the Suspension arm rear

Nuts and bolts for the Suspension arm rear

Nuts and bolts for the Differantial

BMW E30 Reinforcement kit

Product features:

– 3 MM , 3/32″ standard thickness
– Gives you twice the thickness for higher strength
– Weld quality and zinc pre coated sheet metal
– Hot bargain value packThis set…

BMW E30 B-pillar covers, E30 2-doors
These B-pillar covers are often broken and detract from your beautiful interior. With these covers for the 2-door E30 you can replace them to a beautiful condition.∙ Original look /…

1x BMW E30 EDC Emblem

∙ Material: weather resistant PTEG
∙ Color: black mat
∙ Mounting: like the original on top of the tank
∙ Contents of delivery: 1x emblem

Mounting kit for the chassis of the BMW 3-series, E21.
Suitable for all E21 modelsThe set consists of screws, nuts and washers for the following parts:

∙ Front axle subframe
∙ Anchor plates
∙ Mounting differential +…

Mounting plate for the pulse generator in the differential

Yellow plated!

The newly relaunched cult car radio „Bremen SQR 46“ with many new features!

Over the years, some models have become true cult objects. Like the legendary Blaupunkt „Bremen SQR 46“ from the year 1986. Blaupunkt presents…

Screws and nuts for the two heat shields on the E30.

∙ 4x special rear nut (above the exhaust silencer)
∙ 8x screws with rings (above the cardan shaft)
∙ 4x Self-tapping clamp (new!)
∙ 4x plate nuts (new!)

Mounting kit for the two fenders of the BMW E30.

18x Self-tapping clamp

18x plate nuts

Mounting kit for the E30 bonnet.

Flange screws for the flanges of the 168, 188 or 210 differential.

∙ Yellow galvanized
∙ Strength class 8.8
∙ Please choose your differential:168 = 8 bolts
∙ 188 = 12 bolts
∙ 210 = 16 bolts

Mounting kit for the E30 front spoiler pre-facelift, consisting of 5 plate screws made from V2A

4x crosshead screws made from V2A for the inner mounting frame of the fog lights,

6x hex screws, galvanized, for mounting the holder frame to the body

Schock Absorbers Rear 10.9

This item has been moved to: 42. Shock absorber rear 10.9

4x screws made from V2A for the rear license plate lighting of the models E12, E21, E23, E24, E28, E30, M1, Z1

12x screws for the large drive shafts,

M10x50, Strength class 10.9. Allen bolts (for better power transmission).

Check on the vehicle, since there were 2 manufacturers of the drive shafts.

Suitable for the M3, 325ix or…

12x screws for the small drive shafts.

M10X43, Strength class 10.9, Yellow galvanized. Allen bolts (for better power transmission).

Check on the vehicle as there were 2 manufacturers of the drive shafts.

Mounting kit for the seat rails / seat consoles of the driver and front passenger seat (1x per vehicle required)